Ss304 Cartridge Filter Housing for Reverse Osmosis/Security Filter
Basic Info
Model No.: CK-series
Product Description
Model NO.: CK-series Salt Rejection Rate: 99.0% Capacity: 400 Gallon Usage: Environmental Protection, Chemical Industry Face Treatment: Polishing Work Pressure: 0.1-0.4 MPa Filtration Precision: 1um - 100um Trademark: CHUNKE Origin: Guangdong(China) Certification: CE Application: Industry Motive Force: Electric Power Type: Cartridge Filter Housing Connect Type: Flange or Thread Design Pressure: More Than 0.6 MPa Content: 0.5-10t Specification: CE HS Code: 8421999000 INTRODUCTION
Cartridge filter(3 or 5 rounds)(8 or 9 rounds)
CK cartridge filter is a filter system with high precision. It consists of the housing and cartridge elements, mainly used in pretreatment. It can be widely used in electronic industry, sewage treatment, beverage, foods, pure water treatment, also it can acts as home Water Purification equipment.
Working principle
1, Precision filtration is to adopt the molding of filtration material, under the action of the pressure filtration material, make prefiltration through, stay in wall, phosphate-contained residue filtrate through filtering material flow, so as to achieve the purpose of filter.
2, Filtration material molding of filter cloth and filter are: , filter slice, sintering filter tubes, wire wound filter, melt-spurt filter core, etc. Because of the different filtration material, filtration aperture is not identical also. Precision filtration was between sand filter (coarse filter) and ultrafiltration between filtering, filtration aperture in commonly 0.5 ~ 120 mu m range. The same form of filtration material, press envelop dimensions can be divided into different specifications.
3, Wire wound filter (also called hive filter) has two kinds: One kind is polypropylene fibre - polypropylene skeleton cores, highest use temperature 60 ° C; Another kind is absorbent cotton fiber - Stainless Steel frame filter, the highest temperature. Use 120 ° C
4, Melt-spurt polypropylene filter is for raw material, adopting melt-spurt technology shaping Filter Material, the maximum operating temperature 60 ° C. Precision filter can remove the water the suspended material and fine, certain colloid particles, etc.
Technical parameters:
1. Design pressure: More than 0.6Mpa
2. Work pressure: 0.1-0.4MPa
3. Design temperature: Normal temperature
4. Sealing material: Butyl rubber, silicone, fluorine rubber standard, standard configuration is silica gel seal
5. Interface form: Threaded, bar clasp, GB standard flange
6. Applicable filter: Flat crush type PP great filter / 222 socket filter
7. Surface treatment: Mirror polishing, electrolytic polishing, sandblast external surface
8. Filtration precision: 1um - 100um
9. Material: SUS304, SUS316, SUS316L
Product Merits
All the parts of this series filters are made of UPVC material.
The inlet and outlet are in the same line, which connected with the pipe is adopt a 1.5" or a 2" union.
The distribution system of CK filters is distributed from bottom to top. Water is well-proportioned with small strike to cartridges and air is easy to be discharged.
The bottom system of CK filter is designed together as a whole with the top localizer & closure system. Cartridges are easy to be installed, push down and closed, preventing leaking inside.
A series: The lid and the body are connected by a nut. Ensure a good seal performance. B series: Thelid and the body are connected using eyebolts flange method, ensure the filter can stand higher pressure.
CK filter is corrosion resistant, It can be used in SS-none-replace field.
Contact us if you need more details on Cartridge Filter Housing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Filter、Water Purifier. If these products fail to match your need, please contact us and we would like to provide relevant information.
Cartridge filter(3 or 5 rounds)(8 or 9 rounds)
CK cartridge filter is a filter system with high precision. It consists of the housing and cartridge elements, mainly used in pretreatment. It can be widely used in electronic industry, sewage treatment, beverage, foods, pure water treatment, also it can acts as home Water Purification equipment.
Working principle
1, Precision filtration is to adopt the molding of filtration material, under the action of the pressure filtration material, make prefiltration through, stay in wall, phosphate-contained residue filtrate through filtering material flow, so as to achieve the purpose of filter.
2, Filtration material molding of filter cloth and filter are: , filter slice, sintering filter tubes, wire wound filter, melt-spurt filter core, etc. Because of the different filtration material, filtration aperture is not identical also. Precision filtration was between sand filter (coarse filter) and ultrafiltration between filtering, filtration aperture in commonly 0.5 ~ 120 mu m range. The same form of filtration material, press envelop dimensions can be divided into different specifications.
3, Wire wound filter (also called hive filter) has two kinds: One kind is polypropylene fibre - polypropylene skeleton cores, highest use temperature 60 ° C; Another kind is absorbent cotton fiber - Stainless Steel frame filter, the highest temperature. Use 120 ° C
4, Melt-spurt polypropylene filter is for raw material, adopting melt-spurt technology shaping Filter Material, the maximum operating temperature 60 ° C. Precision filter can remove the water the suspended material and fine, certain colloid particles, etc.
Technical parameters:
1. Design pressure: More than 0.6Mpa
2. Work pressure: 0.1-0.4MPa
3. Design temperature: Normal temperature
4. Sealing material: Butyl rubber, silicone, fluorine rubber standard, standard configuration is silica gel seal
5. Interface form: Threaded, bar clasp, GB standard flange
6. Applicable filter: Flat crush type PP great filter / 222 socket filter
7. Surface treatment: Mirror polishing, electrolytic polishing, sandblast external surface
8. Filtration precision: 1um - 100um
9. Material: SUS304, SUS316, SUS316L
Product Merits
All the parts of this series filters are made of UPVC material.
The inlet and outlet are in the same line, which connected with the pipe is adopt a 1.5" or a 2" union.
The distribution system of CK filters is distributed from bottom to top. Water is well-proportioned with small strike to cartridges and air is easy to be discharged.
The bottom system of CK filter is designed together as a whole with the top localizer & closure system. Cartridges are easy to be installed, push down and closed, preventing leaking inside.
A series: The lid and the body are connected by a nut. Ensure a good seal performance. B series: Thelid and the body are connected using eyebolts flange method, ensure the filter can stand higher pressure.
CK filter is corrosion resistant, It can be used in SS-none-replace field.
| model | 10''*3core 20''*3core 30''*3core 40''*3core |
| 10''*5core 20''*5core 30''*5core 40''*5core | |
| 10''*7core 20''*7core 30''*7core 40''*7core | |
| 10''*9core 20''*9core 30''*9core 20''*9core |
Product Categories : Stainless Steel Cartridge Filter Housing
Premium Related Products
Other Products
Hot Products
Chunkewater Pressure Pump for Water TreatmentChke Charcoal Active Carbon for Water PurificationPressure Gauge Water Meter Accessories for Water Treament Plant16 Feet Water Distributor for Water Treatment MachineRunxin Multi Port Manual Filter Valve with Good PriceHigh Quality Water Flow Meter for RO System Water PlantHigh Durable Portable UV Light Sterilizer for Water TreatmentVontron RO Membrane for Reverse Osmosis System Made in ChinaChunke 4040 PVC Hollow Fiber UF MembraneMedical Ozone Generator for Sale/Ozone MachinesThe GRP or FRP Cooling TowerColorful Glassfiber Reinforced Plastic GratingPrestressed Concrete Cylinder Pipe (PCCP)FRP Tank (1-2000M3)GRP Water TankGRP/ FRP Pipe