Polishing Stainless Steel Water Filter Housing

Model NO.: CK Usage: Environmental Protection Style: Vertical Certification: CE Usage.: Environmental Protection, Chemical Industry Face Treatment: Polishing Work Pressure: 0.1-0.4 MPa Filtration Precision: 1um - 100um Trademark: CHUNKE Origin: Guangdong(China) Type: Reverse Osmosis Motive Force: Pressure Performance: Sophisticated Filters Motive Force.: Electric Power Type.: Cartridge Filter Housing Connect Type: Flange or Thread Design Pressure: More Than 0.6 MPa Content: 0.5-10t Specification: CE HS Code: 8421999000 INTRODUCTION
Cartridge filter(3 or 5 rounds)(8 or 9 rounds)

CK cartridge filter is a filter system with high precision. It consists of the housing and cartridge elements, mainly used in pretreatment. It can be widely used in electronic industry, sewage treatment, beverage, foods, pure water treatment, also it can acts as home Water Purification equipment.

Working principle
1, Precision filtration is to adopt the molding of filtration material, under the action of the pressure filtration material, make prefiltration through, stay in wall, phosphate-contained residue filtrate through filtering material flow, so as to achieve the purpose of filter.

2, Filtration material molding of filter cloth and filter are: , filter slice, sintering filter tubes, wire wound filter, melt-spurt filter core, etc. Because of the different filtration material, filtration aperture is not identical also. Precision filtration was between sand filter (coarse filter) and ultrafiltration between filtering, filtration aperture in commonly 0.5 ~ 120 mu m range. The same form of filtration material, press envelop dimensions can be divided into different specifications.

3, Wire wound filter (also called hive filter) has two kinds: One kind is polypropylene fibre - polypropylene skeleton cores, highest use temperature 60 ° C; Another kind is absorbent cotton fiber - Stainless Steel frame filter, the highest temperature. Use 120 ° C

4, Melt-spurt polypropylene filter is for raw material, adopting melt-spurt technology shaping Filter Material, the maximum operating temperature 60 ° C. Precision filter can remove the water the suspended material and fine, certain colloid particles, etc.

Technical parameters:
1. Design pressure: More than 0.6Mpa
2. Work pressure: 0.1-0.4MPa
3. Design temperature: Normal temperature
4. Sealing material: Butyl rubber, silicone, fluorine rubber standard, standard configuration is silica gel seal
5. Interface form: Threaded, bar clasp, GB standard flange
6. Applicable filter: Flat crush type PP great filter / 222 socket filter
7. Surface treatment: Mirror polishing, electrolytic polishing, sandblast external surface
8. Filtration precision: 1um - 100um
9. Material: SUS304, SUS316, SUS316L

Product Merits
All the parts of this series filters are made of UPVC material.
The inlet and outlet are in the same line, which connected with the pipe is adopt a 1.5" or a 2" union.
The distribution system of CK filters is distributed from bottom to top. Water is well-proportioned with small strike to cartridges and air is easy to be discharged.
The bottom system of CK filter is designed together as a whole with the top localizer & closure system. Cartridges are easy to be installed, push down and closed, preventing leaking inside.
A series: The lid and the body are connected by a nut. Ensure a good seal performance. B series: Thelid and the body are connected using eyebolts flange method, ensure the filter can stand higher pressure.
CK filter is corrosion resistant, It can be used in SS-none-replace field.
 

Model	Diameter	Wall thickness	Filter core number	inlet/outlet port	referece flow
CK-10''*3cores	Φ159mm	1.2mm	1-3cores	1''	0.75T/H
CK-20''*3cores	Φ159mm	1.2mm	1-3cores	1''	1.5
CK-30''*3cores	Φ159mm	1.2mm	1-3cores	1''	2.25
CK-40''*3cores	Φ159mm	1.2mm	1-3cores	1''	3
CK-10''*5cores	Φ195mm	1.5mm	3-5cores	1''	1.25
CK-20''*5cores	Φ195mm	1.5mm	3-5cores	1''	2.5
CK-30''*5cores	Φ195mm	1.5mm	3-5cores	1.5''	3.75
CK-40''*5cores	Φ195mm	1.5mm	3-5cores	1.5''	5
CK-10''*7cores	Φ230mm	1.5mm	5-7cores	1''	1.75
CK-20''*7cores	Φ230mm	1.5mm	5-7cores	1.5''	3.5
CK-30''*7cores	Φ230mm	1.5mm	5-7cores	2''	5.25
CK-40''*7cores	Φ230mm	1.5mm	5-7cores	2''	7
CK-20''*9cores	Φ273mm	1.5mm	9-10cores	2''	4.5
CK-30''*9cores	Φ273mm	1.5mm	9-10cores	2''	6.75
CK-40''*9cores	Φ273mm	1.5mm	9-10cores	2''	9
CK-20''*10cores	Φ300mm	1.5mm	9-10cores	2''	5
CK-30''*10cores	Φ300mm	1.5mm	10-12cores	2''	7.5
CK-40''*10cores	Φ300mm	1.5mm	10-12cores	2''	10
CK-30''*12cores	Φ325mm	1.5mm	12-15cores	2''	9
CK-40''*12cores	Φ325mm	1.5mm	12-15cores	2''	12
CK-30''*15cores	Φ350mm	1.5mm	15-17cores	2''	11.25
CK-40''*15cores	Φ350mm	1.5mm	15-17cores	2''	15
CK-30''*20cores	Φ400mm	1.5mm	20-22cores	2.5''	15
CK-40''*20cores	Φ400mm	1.5mm	20-22cores	2.5''	20
CK-40''*25cores	Φ450mm	1.5mm	30-35cores	2.5''	25
CK-40''*35cores	Φ500mm	2.0mm	35-38cores	3''	35
CK-40''*45cores	Φ600mm	2.0mm	40-45cores	3''	45
CK-40''*55cores	Φ700mm	2.0mm	55-60cores	4''	55
CK-40''*85cores	Φ800mm	2.0mm	80-85cores	6''	85
CK-40''*100cores	Φ1000mm	2.0mm	90-100cores	6''	100

Contact us if you need more details on Water Filter Housing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Purifier、Water Treatment System. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stainless Steel Cartridge Filter Housing