fiberglass Assembled Roving For Spray-up E-glass fiber spray up rovingassembled rovingassembled roving For Fiberglass

Introduction of E-Glass Fiber Assembled Roving For SMC

E-glass fiber assembled roving for SMC is typically used to produce automotive parts, doors, bathtubs, Water Tanks and sports apparatus.

Product Properties of E-Glass Fiber Assembled Roving For SMC

1.Excellent anti-static property
2.Good choppablity
3.Excellent flowability
4.Good strand integrity, no fuzz and loose fiber
5.Excellent mechanical property
6.Good dispersion

Package of E-Glass Fiber Assembled Roving For SMC

The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible. 

Storage of E-Glass Fiber Assembled Roving For SMC

Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.