Powder and Emulsion Glass Fiber Chopped Strand Matfiberglass mat

E-Glass Powder Chopped Strand Mat is made of randomly distributed chopped strands held together by a powder binder.
It is compatible with UP, VE, EP, PF resins.
The roll width ranges from 50mm to 3300mm.
Additional demands on wet-out and decomposition time may be available upon request.                                                                                                                                  It is designed for use in hand lay-up, filament winding,  compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts,  Chemical corrosion resistant pipes, tanks, cooling towers and  building components

Product Features:
Fast breakdown in styrene
 High tensile strength, allowing for use in hand lay-up process to produce large-area parts
Good wet-through and fast wet-out in resins, rapid air lease
Superior acid corrosion resistance

Product Specifications:

Special specification can be produce according to customer requirements.

Packaging:
Each Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 275mm. The mat roll is wrapped up with plastic film,and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets.
Storage:
Unless otherwise specified, Chopped Strand Mat should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃~35℃ and 35%~65% respectively.